Easy-Laser D450 Laser Shaft Alignment and Measurement Kit
For users who want a simple, reliable and cost-effective measuring system for the alignment of horizontally-installed machines. Provides vertical and horizontal alignment solutions, graphically on the display screen. EasyLink for Windows is included to upload alignment data and export it to Excel.
Easy-Laser D450 Laser Shaft Alignment and Measurement Kit
System Description
For users who want a simple, reliable and cost-effective measuring system for the alignment of horizontally-installed machines. Provides vertical and horizontal alignment solutions, graphically on the display screen. EasyLink for Windows is included to upload alignment data and export it to Excel.
Programs
Simple laser shaft alignment. See below. System
requires 180° of rotation.
Typical applications:
Pumps, motors, gearboxes.
Simple to Operate
Features Dual Laser System-each laser fires into the opposing sensor. Similar to reverse-dial method.
No training required-follow on-screen instructions.
Precision results in less time.
D450 Specifications (System) |
Display Unit D279 |
||
Programs |
Horizontal, Softfoot, Thermal Growth Compensation, Tolerance Check, Measurement Value Filter |
Housing material |
Anodized aluminum / ABS-plastic |
Measurement distance |
Up to 10 m [33 feet] |
Type of display |
Dot matrix LCD |
Temperature range |
0-50°C [32-122°F] |
Display size |
73×73 mm [2.87″×2.87″] |
Relative humidity |
10-95% |
Displayed resolution |
0.001mm, 0.05 mils/thou |
Max. displayed error |
±1% +1 digit |
Battery |
4 × 1.5 V R14 (C) |
Weight of System |
5 kg [11 lbs] |
Operating time |
24 hours |
Carrying case |
W×H×D: 420×320×110 mm [16″×12″×4″] |
Output port |
RS232 for printer |
Memory | 1,000 Alignment Measurements | ||
Settings |
Contrast and unit (mil/thou/mm) |
||
Dimensions |
WxHxD: 180×180×45 mm [7.1″×7.1″×1.8″] |
||
Weight |
1250 g [2.8 lbs] |
D450 Specifications (Sensors) | Shaft brackets | ||
Housing material | Anodized aluminum. |
Fixture |
V-fixture for chain |
Type of laser | Diode laser. Class II |
Material |
Anodized aluminum |
Laser wavelength | 635-670 nm. |
Shaft diameter |
Ø 20-450 mm [3/4″-18″] with standard chains. |
Laser output power | <1 mW. | ||
Max. Distance | 33 feet (10m) | Rods | |
Type of detectors | PSD 0.39″ sq. (10 x 10mm.) |
Material |
Stainless steel |
Linearity | ±1% + 1 digit over full range. |
Length |
60 and 240 mm [2.36″ and 9.44″] |
Temperature range | 32-122°F (0 – 50 °C). | ||
Relative humidity | 10% – 95%. | ||
Dimensions | 2.4 x 2.4 x 1.97″ (60x60x50mm) | Cables | |
Weight | 7 oz (198 g). | Type | With Push/Pull connection |
Calibration | Not Required. Units self calibrate. | Length | 2 m [78.74″] |
Easy-Laser D450 System :
(2) 10 x 10 mm PSD (laser/detectors) with 2m cables.
(1) Display Unit D279 with firmware for alignment of horizontal machines and SoftFoot Indicator, Thermal Compensation, Tolerance Check and Measurement Value Filter.
(1) Leatherette Cover for Display Unit
(2) Fixture Bases with chain fasteners
(1) Set 2.5″ Risers
(1) Set of 9.5″ Risers, (2) 36″ Chain Extensions
(1) Tightening Tool
(1) Tape Measure
(1) Carrying Case
(1) EasyLink™ Windows® based software and Communication Cable
There are no reviews yet.