Call us 24/7++62-21-97800617
FREE DELIVERY on all orders
FLASH SALE: 60% 3D SCANNER | "

New Olympus OmniScan X3 64 Phased Array Flaw Detector

Original price was: $21,160.00.Current price is: $14,830.00.

In stock

Up to 3x as fast as the OmniScan MX2 flaw detector (max pulse repetition frequency)
Single TOFD menu for an accelerated calibration workflow
800% high amplitude range reduces the need to rescan
Onboard Dual Linear Array and Dual Matrix Array probe support accelerates setup creation.

Buy it now
Brands:

New Olympus OmniScan X3 64 Phased Array Flaw Detector

Olympus OmniScan X3 64

Olympus OmniScan X3 64 detector’s powerful focusing capabilities supported by its larger element-aperture capacity enable you to fully exploit 64-element phased array probes and 128-element aperture TFM. Utilize its enhanced performance to meet the inspection challenges of thick and attenuative materials and expand your potential to develop new procedures for a wider range of applications.

Olympus OmniScan X3 64 Phased Array Flaw Detector with Innovative TFM
Confidence You Can See

Olympus OmniScan X3 64 flaw detector is a complete phased array toolbox. Powerful tools, including total focusing method (TFM) imaging and advanced visualization capabilities, backed by its high image quality enable you to complete your inspection with greater confidence.

Benefit from 64-Pulser Phased Array
Exploit the full potential of 64-element phased array probes using the OmniScan X3 64 flaw detector to achieve improved resolution at the focal point.

Slide Right: Acquired using a 32-channel OmniScan X3 unit with a 64-element probe (5L64-A32 model), this S-scan is a high-quality image but the resolution reflects the fact that only the middle 32 elements could be used for the focal law.

Slide Left: Using a full 64-element aperture (5L64-A32 probe), the OmniScan X3 64 flaw detector provides better PA resolution at the focal point, enabling you to more easily distinguish indications that are close together or in a cluster.

Access Full 128-Element Aperture TFM
Made possible by new generation electronics, TFM imaging offers better focusing capabilities for smaller indications and an improved signal-to-noise ratio (SNR). With its 128-element aperture capacity, the OmniScan X3 64 model provides enhanced image clarity.

Slide Right: This TFM image was acquired with 64 elements of a 128-element probe (3.5L128-I4 model) using an OmniScan X3 32-channel model.

Slide Left: Here, the OmniScan X3 64 flaw detector enabled us to use the full 128-element aperture of our 3.5 MHz, 128-element I4 probe. Note the improved resolution and reduced background noise.

Improved Phased Array

Olympus OmniScan X3 64

Up to 3x as fast as the OmniScan MX2 flaw detector (max pulse repetition frequency)
Single TOFD menu for an accelerated calibration workflow
800% high amplitude range reduces the need to rescan
Onboard Dual Linear Array and Dual Matrix Array probe support accelerates setup creation.

Ease Corrosion Monitoring Using Phased Array
Using phased array to inspect corrosion offers many benefits, including excellent coverage and resolution. However, becoming proficient in phased array techniques can be challenging. The OmniScan X3 flaw detector combines advanced functions such as gate synchronization with thoughtfully designed software and simplified menus, so you can obtain accurate data more easily. Configure your setup quickly thanks to its A-scan synchronization processing and manual time-corrected gain (TCG).

 • Data Specifications • Acoustic Specifications • TFM/FMC • Operating Environment 

Type Multigroup, multimode ultrasonic flaw detector
Size (W × H × D) 335 mm x 221 mm x 151 mm (13.2 in. x 8.7 in. x 5.9 in.)
Weight 5.7 kg (12.6 lb) (with 1 battery)
Hard Drive Capacity OmniScan X3 : Internal 64 GB SSD
OmniScan X3 64 : Internal 1TB SSD
extendable using an external USB drive
Storage Devices SDHC and SDXC cards or most standard USB storage devices
Max Onboard File Size 25 GB
GPS Yes (unless specified otherwise for some regions)
Alarms 3
Wireless Connection Yes – wireless LAN dongle included in the package (model varies according to region)
PA Connectors 1 connector
UT Connectors 4 (2 channels P/R)
Certifications ISO 18563-1:2015
ISO-22232-1:2020
Display
Type TFT LCD with resistive touch screen
Size 269 mm (10.6 in.)
Resolution 1280 × 768 pixels
Number of Colors 16 million
Viewing Angles Horizontal: −85° to 85°
Vertical: −85° to 85°
I/O Ports
USB 2.0 2 ports (one hidden behind the battery)
USB 3.0 1 port
Video Output Video out (HDMI)
Memory Card SDHC port
Communication Ethernet
I/O Lines
Encoder 2-axis encoder line (quadrature quadrature direction), 3rd encoder ready
Digital Input 6 digital inputs, TTL
Digital Output 5 digital outputs, TTL
Acquisition On/Off Switch Through the configuration of a digital input
Power Output Line 5 V nominal, 1 A (short-circuit protected), and 12 V output at 1 A
External DC Supply
DC-IN Voltage 15 VDC to 18 VDC (min. 50 W)
Connector Circular, 2.5 mm pin diameter, center-positive
Battery
Type Lithium-ion battery
Capacity 87 Wh
Number of Batteries 2
Life 5 hours using 2 batteries (hot-swap capable)
PA/UT Configuration
Bit Depth 16 bits
Maximum PRF 20 kHz
Frequency
Effective Digitizing Frequency Up to 100 MHz
Display
Refresh Rate A-scan: 60 Hz; S-scan: 20 Hz to 30 Hz
Envelope (echo-dynamic mode) Yes: Volume-corrected S-scan (30 Hz)
A-Scan Height Up to 800%
Synchronization
On Internal Clock 1 Hz to 10 kHz
External Pace Yes
On Encoder On 2 axes: from 1 to 65,536 steps

Data Specifications

Processing
Maximum Number of A-Scan Data Points Up to 16,384
Real-Time Averaging PA: 2, 4, 8, 16
UT: 2, 4, 8, 16, 32, 64
Rectification RF, full wave, half wave , half wave-
Filtering PA channel (OmniScan X3): 8 low-pass, 6 band-pass, and 4 high-pass filters
PA channel (OmniScan X3 64): 9 band-pass and 7 high-pass filters
UT channel: 8 low-pass, 6 band-pass, and 4 high- pass filters (3 additional filters when configured in TOFD)
Video Filtering Smoothing (adjusted to the probe frequency range)
Programmable TCG
Number of Points 32: One TCG (time-corrected gain) curve per focal law
Range PA (standard): 40 dB per step of 0.1 dB
UT: 100 dB per step of 0.1 dB
Maximum Slope PA (standard): 40 dB/10 ns
UT: 40 dB/10 ns
 

Acoustic Specifications

Model OmniScan X3 OmniScan X3 64 Both
Pulser PA Channel PA Channel UT Channels
Voltage 40 V, 80 V, and 115 V 10 Vpp, 20 Vpp, 40 Vpp, 80 Vpp, 120 Vpp, and 160 Vpp 85 V, 155 V, and 295 V
Pulse Width Adjustable from 30 ns to 500 ns; resolution of 2.5 ns Adjustable from 30 ns to 1000 ns (half period of bipolar pulse or duration of negative of pulse); resolution of 5 ns Adjustable from 30 ns to 1,000 ns; resolution of 2.5 ns
Fall Time < 10 ns < 10 ns < 10 ns
Pulse Shape Negative square pulse Bipolar negative-positive square pulse Negative square pulse
Output Impedance 28 Ω in pulse-echo
24 Ω in pitch-catch
35 Ω < 30 Ω
Receiver PA Channel UT Channels
Gain Range 0 dB to 80 dB maximum input signal; 550 mVp-p (full-screen height). 0 dB to 80 dB; maximum input signal 900 mVp-p (full-screen height). 0 dB to 120 dB maximum input signal; 34.5 Vp-p (full-screen height).
Input Impedance 57 Ω ± 10% at 9 MHz in pulse-echo
100 Ω ± 10% at 9 MHz in pitch-catch
120 Ω ±10 % at 13 MHz 50 Ω in pulse-echo mode
50 Ω in pulse-receive mode
System Bandwith 0.5 MHz to 18 MHz 0.2 MHz to 26.5 MHz 0.25 MHz to 28 MHz
Beam Formation PA Channel UT Channels
Scan Type Single, linear, sectorial, compound, and TFM
Maximum Aperture OMNIX3-PATFM1664PR = 16 elements
OMNIX3-PATFM16128PR = 16 elements
OMNIX3-PATFM32128PR = 32 elements
OMNIX3-PATFM64128PR = 64 elements
Number of Receiving Elements OMNIX3-PATFM1664PR = 64 receiving elements
OMNIX3-PATFM16128PR = 128 receiving elements
OMNIX3-PATFM32128PR = 128 receiving elements
OMNIX3-PATFM64128PR =128 elements
Number of Focal Laws Up to 1024
Delay Range Transmission 0 µs to 10 µs in 2.5 ns increments 0 µs to 10 µs in 5 ns increments
Delay Range Reception 0 µs to 6.4 µs in 2.5 ns increments
 

TFM/FMC

Supported Modes Pulse-echo: L-L, T-T, and TT-TT
Self-tandem: LL-L, TT-T, TT-L, TL-T, LT-T, TTT-TT, and TL-L
Number of Groups Up to 4 simultaneous TFM groups
Maximum Aperture 64-element aperture for 64:128PR
64-element extended aperture (32:128PR only)
32-element extended aperture for 16:64PR and 16:128PR
128-element extended aperture for 64:128PR
Image Resolution Up to 1024 × 1024 (1 M points) for each TFM group
Live TFM Envelope Yes

Operating Environment

Ingress Protection Rating IP65 certified (completely protected against dust and water jets from all directions (6.3 mm nozzle))
Shockproof Rating Drop tested according to MIL-STD-810G
Intended Use Indoor and outdoor use
Altitude Up to 2,000 m (6,561 ft)
Operating Temperature −10 °C to 45 °C (14 °F to 113 °F)
Storage Temperature −20 °C to 60 °C (−4 °F to 140 °F) (with battery inside)
−20 °C to 70 °C (−4 °F to 158 °F) (with no battery inside)
  • Availability: 16 In Stock

We have a number of Home Delivery services available to you. Availability of these options will be shown at checkout.

Delivery Service Description Please Note Price
Standard Within 3-4 working days
(07:00 - 19:30hrs)
Weekdays Only (only applies to orders placed before 6pm) $3.95
Express Delivery Next Working Day (08:00 - 18:00hrs) Weekdays Only, applies to orders placed before 4pm Mon-Thurs, before 3pm on Fri & before 2pm on Sat (no Sunday deliveries) $5.95
Premium Delivery - DPD Next Working Day (07:00 - 19:30hrs) Weekdays Only, applies to orders placed before 4pm Monday-Thursday. (Orders placed after 4pm Thur - Sunday before 1pm, will be delivered Monday) $6.95
Large Parcel Delivery Within 3-5 working days (07:00 - 19:30hrs) Weekdays Only (only applies to orders placed before 6pm) $14.95
Premium Saturday Delivery Saturday Delivery (07:00 - 19:30hrs) Delivered Saturday with a 1 Hour delivery slot and Tracking. (only applies to orders placed on Friday before 2pm) $7.95
Premium Sunday Delivery Sunday Delivery (07:00 - 19:30hrs) Delivered Sunday with a 1 Hour delivery slot and Tracking. (only applies to orders placed on Friday before 2pm) $7.95

Customers reviews

There are no reviews yet.

Be the first to review “New Olympus OmniScan X3 64 Phased Array Flaw Detector”

Your email address will not be published. Required fields are marked *

Search for products

Back to Top
Product has been added to your cart